搜索结果: 1-15 共查到“工学 Mechanical Properties”相关记录198条 . 查询时间(0.078 秒)
Improvement of physical and mechanical properties of poplar wood via immobilization of rosin by grafting of vinyl chains
Wood polymeric rosin wood impregnation mechanical properties fluorescence microscope
2023/12/4
Rosin is renewable biomass with the potential to enhance wood properties. However, its high leaching rate restricts the durability of rosin impregnation. To immobilize rosin in wood structure, polymer...
Mechanical properties of carbon nanotubes/epoxy nanocomposites: Pre-curing, curing temperature, and cooling rate
Carbon nanotubes curing epoxy mechanical properties nanocomposites polymer nanocomposites
2023/11/30
The effects of composite fabrication, such as pre-curing, curing temperature, and cooling rate, were studied. In this work, the pre-curing was defined as heat treatment of Multi-Walled Carbon Nanotube...
![](http://www.firstlight.cn/upload/imgfile/20236/19/202361913440292.jpg)
Versatile building blocks make structures with surprising mechanical properties(图)
机械性能 机器人 风力涡轮机
2023/6/19
Rheological and mechanical properties of cellulose/LDPE composites using sustainable and fully renewable compatibilisers
blends cellulose and other wood products compatibilization phase behavior rheology
2024/2/29
Cellulose composites with polyethylene (PE) permit to reinforce this commodity polymer, while at the same time introducing renewable content and thus minimizing the use of petroleum-based feedstocks. ...
3D Printing of Poly(propylene fumarate) Oligomers: Evaluation of Resin Viscosity, Printing Characteristics and Mechanical Properties
3D Printing Poly(propylene fumarate) Oligomers Resin Viscosity
2024/2/29
Complex three-dimensional (3D) pore geometries, useful for tissue engineering scaffolds, can be fabricated via photo-crosslinking of resorbable poly(propylene fumarate) (PPF) resins using stereolithog...
Preparation and mechanical properties of green epoxy nanocomposites with cellulose nanocrystals
PHYSICAL-PROPERTIES CURING BEHAVIOR SOYBEAN OIL EPOXIDATION NANOFIBER MODEL
2024/3/5
Epoxy resin is widely used to make composites, electronic and electric parts, adhesives, and coating materials because it has excellent thermal, electrical, and mechanical properties. Using natural ma...
Modified cellulose nanocrystals enhancement to mechanical properties and water resistance of vegetable oil-based waterborne polyurethane
biopolymers and renewable polymers polyurethane silylated cellulose nanocrystals surface modification
2024/3/8
Environmentally friendly and lightweight silylated cellulose nanocrystal (SCNCs)/waterborne polyurethane (WPU) composite films that exhibit excellent mechanical properties and water resistance were pr...
Mechanical properties of composite material reinforced with textile waste from the process of tyres recycling
epoxy resin quality testing microfiber testing
2016/9/2
The paper deals with the polymeric fibre composite with the reinforcement on the basis of the waste from the process of the tyres recycling. The aim of the research was the use of the material of clea...
Effect of microwave modification on mechanical properties and structural characteristics of soy protein isolate and zein blended film
protein film protein modification breaking strength fracturing distance structural characteristics
2016/5/11
Soy protein isolate (SPI) and zein were blended at different ratios, and native and microwave-modified films were prepared at pH 12 in an ethanol/water (20 : 80) mixture. The effect of the...
Stretchable polyurethane sponge reinforced magnetorheological material with enhanced mechanical properties
magnetorheological 3D network supporting polyurethane sponge
2015/3/24
A stretchable magnetorheological material (SMRM) consisting of micro-meter carbonyl iron (CI) particles, low cross-linking polyurethane (PU) polymer and porous PU sponge has been developed. Due to the...
MODELING THE INTERDEPENDENCE OF ELECTROCHEMICAL AND MECHANICAL PROPERTIES IN PER SULFONATE ACID PROTON EXCHANGE MEMBRANES
PEM fuel cell membrane Conductivity Measurement
2015/1/12
Proton exchange membrane fuel cells (PEMFC’s) offer an attractive alternative energy resource over traditional fossil fuels. The advantages such as high power density, relatively quick start-up, rapid...
Determination of oxygen permeability and mechanical properties of the aluminium paper foils
packaging modulus of elasticity butter curd
2014/11/28
The paper deals with the determination of the oxygen permeability and mechanical properties of butter and curd aluminium paper foils Radaflex applied in the food packaging. Foil Radaflex is a paper fo...
Measurement and Computational Modeling of the Mechanical Properties of Parallel Strand Lumber
Measurement Computational Modeling Mechanical Properties Parallel Strand Lumber
2014/10/22
Wood products tend to have a very large variability resulting in over design of engineered products. A relatively new structural composite wood material, Parallel Strand Lumber (PSL) has been introduc...
Preparation and mechanical properties of the magnetorheological elastomer based on natural rubber/rosin glycerin hybrid matrix
Natural rubber magnetorheological elastomers rosin glyceride wettability CI particle dispersion matrix by rheometer measurements
2015/3/24
To improve the mechanical properties of the natural rubber based magnetorheological elastomers (MREs), rosin glycerin ester was added into the carrier matrix to enhance wettability and dispersibility ...
Measuring Mechanical Properties of 3D Carbon/Carbon Composite Using Automated Grid Method
carbon carbon composites mechanical properties non-contact measurement method automated grid method Iosipescu shear test
2015/3/26
A precise measurement, which was based on the automated grid method, was developed to analyze the mechanical properties of a three-dimensional reinforced carbon/carbon composite under tensile and shea...