搜索结果: 1-7 共查到“材料科学 APS”相关记录7条 . 查询时间(0.031 秒)
WC基涂层由于具有较高的硬度、优异的耐磨性、较好的抗腐蚀性,广泛应用于石油等工业中提高零件的磨损和腐蚀性能。随着现代化工业中工件服役环境日趋复杂,对制备性能优异的WC基涂层要求越来越高。在热喷涂技术中,热喷涂大气等离子热喷涂(APS) 喷涂温度范围广,可以提高至数万温度,在喷涂难容材料方面具有无与伦比的优势,而超音速火焰喷涂(HVOF)由于具有较高的焰流速度,粒子动能较高,同时由于喷涂过程中N2等...
运用超音速火焰喷涂(HVOF)和等离子喷涂(APS)技术在7005 铝合金表面制备了WC-Co/ NiCrBSi 复合涂层,分析了2 种技术所制备复合涂层的微观结构,研究了其在高温条件下的摩擦磨损行为与机制。结果表明:采用HVOF 技术制备的复合涂层孔隙率仅为APS 制备复合涂层的28. 9%;其显微硬度(838. 4HV0. 5)以及与基体间元素扩散层厚度( Al:13. 17 μm, Ni:1...
Criteria of assessment of powders provided to spray by the APS method for new and conventional layers type TBC
Metallic alloys Thin&thick coatings TBC
2009/12/3
Purpose: Verification of up-to-now use of conventional powders, provided to spray by the APS method for layers type TBC and its possible adaptation to layers of new types, which are based on new ceram...
Thermal diffusivity of RE2Zr2O7 - type ceramic powders intended for TBCs deposited by APS
Metallic alloys Thin&thick coatings TBC
2009/12/3
Purpose: The aim of this paper is to provide overall characteristics of the Laser-Flash method and to determine the thermal diffusivity of powders intended for thermal spraying of thermal barrier coat...
Characterisation of APS TBC system during isothermal oxidation at 1100°C
Silesian University of Technology WSK “PZL Rzeszów”
2009/12/1
Purpose: The purpose of presented investigations was metallographical characterization of failure modes of air
plasma sprayed thermal barrier coatings system in isothermal oxidation test conditions a...
硅烷γ-APS协同稀土镧钝化镀锌钢板的研究
硅烷 稀土 钝化
2009/9/30
采用γ-氨丙基三乙氧基硅烷(γ-APS)协同稀土镧盐钝化镀锌钢板.通过先在试样表面组装一层γ-APS薄膜,再在膜上沉积稀土镧转化膜制得硅烷稀土复合膜.采用电化学交流阻抗(EIS)、盐雾试验(NSS)检测复合膜耐腐蚀性,结果表明,复合膜的耐腐蚀性能优于单一硅烷、稀土转化膜.原子力显微镜检测结果表明复合膜相对于单一硅烷、稀土转化膜更加均匀,致密.EDS检测表明复合膜主要由N,O,Si,Fe,Zn,La...