搜索结果: 1-9 共查到“材料科学 Carbides”相关记录9条 . 查询时间(0.078 秒)
Structure of TiBN coatings deposited onto cemented carbides and sialon tool ceramics
Tool materials Thin & Thick coatings Sialon
2009/12/3
Purpose: The aim of this paper was investigated structure of sintered carbides WC-Co type and sialon tool ceramics with wear resistance ternary coatings TiBN type deposited by cathodes arc evaporation...
The Mössbauer spectroscopy studies of ε to cementite carbides transformationduring tempering of high carbon tool steel
Mö ssbauer spectroscopy CEMS Steel Tempering Iron carbides
2009/12/2
Purpose: This work presents results of investigations using Mössbauer spectroscopy technique and their
interpretation concerning transformation of ε to cementite carbides during tempering in rel...
Bainitic nodular cast iron with carbides obtaining with use of Inmold method
Innovative foundry technologies and materials TDA method Nodular cast iron with carbides Bainite
2011/3/31
In these paper bainitic nodular cast iron with carbides as-cast obtaining has been presented. This cast iron has been obtained with use of Inmold method. It was shown, that there is the possibility...
Bainitic nodular cast iron with carbides obtaining with use of Inmold method
Innovative foundry technologies and materials TDA method Nodular cast iron with carbides Bainite
2011/3/31
In these paper bainitic nodular cast iron with carbides as-cast obtaining has been presented. This cast iron has been obtained with use of Inmold method. It was shown, that there is the possibility...
Precipitation of carbides in Cr-Mo-V cast steel after service and regenerative heat treatment
Metallographic Heat Treatment Cast Steel Carbides
2011/3/29
The paper presents results of research on precipitation processes in chromium – molybdenum – vanadium cast steel. The examined material was the following cast steel grade: L21HMF and G17CrMoV5 – 10 (...
Precipitation of carbides in Cr-Mo-V cast steel after service and regenerative heat treatment
Metallographic Heat Treatment Cast Steel Carbides
2011/3/29
The paper presents results of research on precipitation processes in chromium – molybdenum – vanadium cast steel. The examined material was the following cast steel grade: L21HMF and G17CrMoV5 – 10 (...
Structure and properties of tool gradient materials reinforced with the WC carbides
Cemented carbides Tool gradient materials Powder metallurgy
2010/2/8
Purpose: The purpose of the paper is to describe sintered Tool Gradient Materials manufactured by powder metallurgy process. The Powder Metallurgy method has been chosen to manufacture tool gradient m...
Development of a feedstock formulation based on PP for MIM of carbides reinforced M2
Powder metallurgy Extrusion Feedstock Tool materials
2010/2/8
Purpose: Influence of binder composition on some selected properties of feedstock contained powder of M2 with 10% of carbides powders are demonstrated in the paper.
Design/methodology/approach: Torqu...
Structure and properties of hot-work tool steel alloyed by WC carbides by a use of high power diode laser
Heat treatment Laser Tool materials
2010/2/9
Purpose: The paper presents the effect of alloying with tungsten carbide on properties of the X40CrMoV5-1 steel surface layer, using the high power diode laser (HPDL).
Design/methodology/approach: Th...