搜索结果: 1-15 共查到“金属材料 Heat Treatment”相关记录17条 . 查询时间(0.093 秒)
Selection of heat treatment condition of the Mg-Al-Zn alloys
Heat treatment Magnesium alloys Mechanical properties
2009/12/14
Purpose: Main aim of this paper are results of the optimization of heat treatment conditions, which are temperature and heating time during solution heat treatment or ageing as well the cooling rate a...
Effect of heat treatment on tensile and fracture toughness properties of 6082 alloy
Metallic alloys Fracture mechanics Mechanical properties
2009/12/14
Purpose: The present study investigates the effect of heat treatment parameters (temperature and time) on the tensile properties and fracture toughness of 6082 aluminium alloy.
Design/methodology/app...
The influence of the heat treatment on the microstructure and properties of Mg-Al-Zn based alloys
Heat Treatment Metallography Magnesium alloys
2009/12/3
Purpose: In the following paper there have been the structure and properties of the MCMgAl12Zn1, MCMgAl9Zn1, MCMgAl6Zn1, MCMgAl3Zn1 magnesium cast alloy as-cast state and after a heat treatment presen...
Heat treatment and mechanical stability behaviour of medium-carbon TRIP-aided bainitic steel
Metallic alloys Heat treatment TRIP-effect
2009/12/2
Purpose: The aim of the paper is to determine the influence of the isothermal holding conditions in a range of
bainitic transformation on the mechanical stability of retained austenite for medium-car...
Purpose: This paper reports results of in-house experimentation and an exhaustive literature search on heat
treatment of H13 tool steel. Heat treatment strategy practiced by the industry is described...
Optimisation of regenerative heat treatment parameters of G21CrMoV4-6 cast steel
Metallic alloys Ductility Heat treatment
2009/12/1
Purpose: of the paper was to design the optimal parameters of regenerative heat treatment of G21CrMoV4–6
(L21HMF) cast steel after long-term serviced at elevated temperature.
Design/methodology/app...
Heat Treatment of Gold Alloys.
Phosphorus segregation in Cr- Mo -V cast steel after regenerative heat treatment
Metallography Heat treatment Cast steel Segregation of phosphorus
2011/3/29
The paper presents results of research on the influence of regenerative heat treatment on segregation of phosphorus in Cr – Mo – V cast steels. The material for investigation was L21HMF and G17CrMoV5 ...
Phosphorus segregation in Cr- Mo -V cast steel after regenerative heat treatment
Metallography Heat treatment Cast steel Segregation of phosphorus
2011/3/29
The paper presents results of research on the influence of regenerative heat treatment on segregation of phosphorus in Cr – Mo – V cast steels. The material for investigation was L21HMF and G17CrMoV5 ...
Effect of heat treatment on the structure and fatigue behaviour of austenitic Fe–Ni alloy
Fatigue Metallic alloys Heat treatment
2010/2/4
Purpose: The paper addresses the problem of determining the dependence between initial heat treatment of an austenitic Fe–Ni alloy and its fatigue life at room and elevated temperature Specimens of Fe...
Investigation of the MCMgAl12Zn1 magnesium alloys structure after heat treatment
Heat Treatment Magnesium alloys
2010/2/4
Purpose: Main aim of this paper is to describe the structure of the MCMgAl12Zn1 magnesium cast alloy as-cast state and after a heat treatment.Design/methodology/approach: The following results concern...
Effects of zonal heat treatment on residual stresses andmechanical properties of electron beam welded TC4 alloy plates
electron beam welding zonal heat treatment residual stress microstructure mechanical property
2010/3/17
Zonal heat treatment(ZHT) was conducted in situ to 14.5 mm-thick TC4 alloy plates by means of defocused electron beam after welding. The effects of ZHT on residual stresses, microstructures and mechan...
Effect of selected heat treatment parameters of AK9 silumin on its tensile strength
Mechanical properties Crystallization Heat treatment TDA
2011/3/15
Development of modern techniques creates supply of better and better structural materials having higher strength. Light metals and their alloys are more and more often used for metal structures, where...
Nickel super alloy INCONEL 713LC–structural characteristics after heat treatment
Metallic alloys Nickel super-alloy Structural phase analysis Intermetallic phase γ’
2010/2/22
Purpose: Nickel super alloy’s products are mainly using for construction parts of jet engines, gas turbines and turbo-blowers.Design/methodology/approach: Super alloy was commercially produced and was...
Heat treatment and mechanical properties of low-carbon steel with dual-phase microstructure
Heat treatment DP-type steel Martensite Mechanical properties
2010/2/22
Purpose: The aim of the paper is to design heat treatment conditions of dual-phase steel and to determine their influence on the structure and mechanical properties of steel.
Design/methodology/appro...