工学 >>> 材料科学 >>> 材料科学基础学科 材料表面与界面 材料失效与保护 材料检测与分杂技技术 材料实验 材料合成与加工工艺 金属材料 无机非金属材料 有机高分子材料 复合材料 材料科学其他学科
搜索结果: 1-15 共查到材料科学 microstructure相关记录107条 . 查询时间(0.093 秒)
An impedance spectroscopy (IS) method is employed to investigate the magneto-induced microstructure mechanism of magnetorheological plastomers (MRP). The IS of MRP with two typical particle distributi...
The effect of destabilization heat treatment on the microstructure, hardness, fracture toughness and abrasive wear resistance of high chromium hardfacing was investigated. The results from the study...
The study presents the technological backgrounds of the process of melting and casting Al-Co, Al-Ni, and Al-Ti master alloys, used as refiners of the microstructure of cast silumins. Basing on the an...
The study presents the technological backgrounds of the process of melting and casting Al-Co, Al-Ni, and Al-Ti master alloys, used as refiners of the microstructure of cast silumins. Basing on the an...
Microstructure analyses of high-pressure die-casting AM50 magnesium alloy are presented. Investigated pressure casting was produced on a cold chamber die-casting machine with locking force at 1100 ton...
Microstructure analyses of high-pressure die-casting AM50 magnesium alloy are presented. Investigated pressure casting was produced on a cold chamber die-casting machine with locking force at 1100 ton...
Laser surface alloying is a unique method where the external alloying elements in the form of powder, past, suspension, electrolytic coatings and plasma or flame sprayed coatings are introduced into a...
In the last few years attention of automotive industry is focused on modern high-strength steels, which allow to decrease the weight of different elements of vehicles, what is directly connected with ...
Besides bronze, the alloys of copper with zinc and brass are the first alloys accompanying the development of mankind. Nowadays, they are widely applied in technology, and next to light metals they be...
The chemical, machinery, food, automotive, building, nuclear and shipbuilding industry requires increasingly steels with good combination of excellent corrosion resistance, high mechanical properties ...
Properties of cast zinc alloys are comparable to these of aluminium alloys. Differences are connected to a lower melting temperature and bigger density. Zinc has a density of 7.14g/cm3, melting temper...
Polycrystalline copper is one of the most widely studied materials under the variety of deformation path and over large strains, strain rates and temperatures. Because of their high thermal and electr...
On 23.07.1996 the European Parliament and the Council issued a Decision No 1692/96 to upgrade the trans-European conventional rail network to be equipped for speeds up to 200 km/h with an axle load no...
Several different methods have been proposed to produce ultra fine grained (UFG) or nano-structured (NS) materials by imposing severe plastic deformation (SPD). Semi products produced by SPD are of gr...

中国研究生教育排行榜-

正在加载...

中国学术期刊排行榜-

正在加载...

世界大学科研机构排行榜-

正在加载...

中国大学排行榜-

正在加载...

人 物-

正在加载...

课 件-

正在加载...

视听资料-

正在加载...

研招资料 -

正在加载...

知识要闻-

正在加载...

国际动态-

正在加载...

会议中心-

正在加载...

学术指南-

正在加载...

学术站点-

正在加载...