搜索结果: 1-10 共查到“化学工程 electrochemical”相关记录10条 . 查询时间(0.074 秒)
Revealing the effect of aluminum content on the electrochemical performance of magnesium anodes for aqueous batteries
aluminum content discharge potential Mg-Al alloy anodes utilization efficiency
2023/6/21
Al is one of the principal alloying elements for Mg anodes. In this study, a series of Mg-Al alloys has been evaluated as anode materials for optimizing the Al addition amount in Mg anodes with the in...
Low-cost electrochemical filtration carbon membrane prepared from coal via self-bonding
Electrochemical filtration carbon membrane Caking coal Self-bonding Organic pollutants Oxidation mechanism
2023/6/19
Electrochemical filtration membranes are highly effective for wastewater treatment. However, their relatively high production cost may limit their large-scale production and industrial application. In...
Electrochemical characterization of MnO2 as electrocatalytic energy material for fuel cell electrode
fuel cell impedance polarization electro coating
2015/5/12
Development of inexpensive non Pt based high electrocatalytic energy materials is the need of the hour for fuel cell electrode to produce clean alternative green energy from synthesized bio alcohol us...
ELECTROCHEMICAL TESTING OF PASSIVITY STATE AND CORROSION RESISTANCE OF SUPERMARTENSITIC STAINLESS STEELS
martensitic stainless steel heat treatment polarization test
2009/10/23
On low interstitial - supermartensitic stainless steels (X1CrNiMo 12-5-1, X2CrNiMo 13-6-2, X1CrNiMo 12-6-2)
the electrochemical potentiodynamic polarization tests were carried out and the passive sta...
Ultrasound Assisted Electrochemical Degradation of Cyanides: Influence of Electrode Type
Cyanide degradation Electro-oxidation Sonoelectro-oxidation Sonoelectrochlorination
2009/10/10
The sonoelectrochemical degradation of cyanide ions (CN−) in the presence of 6 types of electrodes(aluminium, titanium, nickel, copper, stainless steel (inox), and graphite) were investigated in...
Determination of Susceptibility to Intergranular Corrosion of UNS 31803 Type Duplex Stainless Steel by Electrochemical Reactivation Method
Duplex stainless steel Sigma phase Secondary austenite Electrochemical potentiostatic reactivation
2009/9/30
Specimens taken from a hot rolled cylindrical duplex stainless steel (DSS) bar with 22% Cr and 5% Ni
grade were solution annealed at 1050 ◦ C and then sensitization heat treatments were conduct...
Electrochemical Capacitance of Mesoporous Gold
Electrochemical Capacitance Mesoporous Gold
2009/7/28
The surfaces of nanoscale gold particles and
components are oxide-free under normal ambient
conditions. This unusual attribute permits the
exploration of microstructures and functionalities that
w...
Electrochemical measurement of flow parameters in dilute solution
electrochemical measurement ionic migration
2009/4/22
Electrochemical measurement of flow parameters in dilute solution.
The Center for Electrochemical Engineering at the University of South Carolina
Electrochemical Engineering 电化学工程
2007/12/21
The Center for Electrochemical Engineering (CEE) at the University of South Carolina was created with the broad vision to forge ahead the theory and practice of electrochemical power sources, electrop...
Turning-form electrode in ultrasonicaided electrochemical finishing
Surface treatment Turning-form electrode Ultrasonic-aided Electrochemical finishing
2010/2/22
Purpose: The ultrasonic-aided electrochemical finishing following traditional turning by a turning-form electrode for several die materials is demonstrated.Design/methodology/approach: A guide line fo...