搜索结果: 1-8 共查到“纤维制造技术 Effects”相关记录8条 . 查询时间(0.157 秒)
Effects of atmospheric pressure plasma treatments on certain properties of cotton fabrics
atmospheric plasma cotton pilling physical properties
2009/6/17
In this study, air and argon atmospheric plasma were used for modifying some properties of bleached plain cotton fabrics. Certain physical properties such as pilling, thermal resistance, thermal condu...
Effects of Pin Count and Faller Pitch of Gill-Drawing Frame on Irregularities of Sliver Made from Fine Denier Fibers
Fine denier fiber Pin-drafting Nip gauge Pin density Pitch between moving gill-faller bars
2009/4/21
In order to improve the quality of sliver made from fine denier fibers, a pin drafting method was investigated. Especially, the study of fiber control in drafting zone, pin count and pitch between mo...
Effects of Fiber Denier, Fiber Cross-Sectional Shape and Fabric Density on Acoustical Behavior of Vertically Lapped Nonwoven Fabrics
Fiber Cross-Sectional Shape Fabrics
2009/3/9
Acoustical insulation and absorption properties of nonwoven fabrics depend on fiber geometry and fiber arrangement within the fabric structure. The different structures of the fibers result in differe...
Interferometric Studies for the Annealing Effects on the Necking Deformation along Polypropylene Fibers
Necking Deformation Polypropylene Fibers
2009/3/5
An automated multiple-beam Fizeau fringes in transmission technique was used with a fiber-drawing device to detect necking deformation along polypropylene (PP) fibers axis under different conditions o...
Effects of Knit Structure on the Dimensional and Physical Properties of Winter Outerwear Knitted Fabrics
knitted fabric pilling resistance abrasion resistance bursting strength
2009/2/17
In this study, an experimental work is presented to determine the effects of fourteen different
knit structures of 80% Lambswool-20% Polyamide knitted outerwear fabrics, on
the dimensional propertie...
Linking Yarns from Staple and Filament Fibres by High-Efficiency Pneumatic Interlacing. Part II: Analysis of Hairiness, Number of Faults and Estimation of the Linking Effects
filament yarns staple yarns linking pneumatic interlacing interlacing nozzle
2009/2/17
Part II of this article is a continuation of the one presented in Fibres & Textiles in Eastern
Europe, No. 1/2008. Part I outlined the innovation of a method of linking yarns by pneumatic
interlacin...
The Effects of Elastane Yarn Type and Fabric Density on Sewing Needle Penetration Forces and Seam Damage of PET/ Elastane Woven Fabrics
air-covered elastane yarn density needle damage index needle penetration force
2009/2/16
This paper presents the effects of elastane yarn type and fabric density on the seam performance of PET/ elastane woven fabrics. In this study, 12 different weft stretched fabrics were woven with 2 di...
A Study of the Damage Caused to Dyed Cotton Fibres and its Effects on the Properties of Rotor- and Ring-Spun Melange Yarns
fibre damage cotton flock dyeing ring spinning rotor spinning
2009/2/13
A detailed study of the effect of flock dyeing of cotton fibre on the damage and different properties of rotor- and ring-spun (100% dyed, 50% dyed and 50% grey melange) yarns is reported. It was found...